2 4
EN
Daily Maintenance
Clean up the dust channel
Open the top cover of the dust chamber, take out the dust bag,
discard it in the trash can, take out a new dust bag, check and
make sure there is no damage, put it into the dust bag slot, and
close the cover. For more details, please refer to the dust cham-
ber indicator light.
Note: The dust bag is disposable, please replace it regularly.
If the channel is blocked by foreign matter, it is recommended
to unplug the power cord, turn the dust chamber, refer to the
figure below, remove the transparent cover of the dust channel
with a screwdriver, and clean out the foreign matter.
Note: Violent disassembly is prohibited. After cleaning the
channel, assemble the parts back to where they are supposed
to be.
Replace the dust bag
Please clean the sensor regularly, and wipe off the dust on the
sensor with a soft dry cloth or cleaning brush.
Clean the sensor
Replace the dust bag
Recharging
sensor
Recharging
sensor
Along-the-wall sensor
Anti-drop sensor
Transparent cover of the dust channel
Dust channel
Open the
top cover.
Pull up the
handle of the
dust bag to
take out the
dust bag.
Discard
the old
dust bag.
Install a new
dust bag
and close the
top cover.
