Let's Get Started!
Installation & Assembly Instructions
Assemble and Attach the Exhaust Hose
• Extend both sides of the hose. (Fig. 1a)
• Screw on the hose inlet (Fig. lb)
• Screw on the hose outlet (Fig. le)
• Attach the exhaust hose by sliding the hose inlet from the top down into the air
outlet grille. (Fig. ld)
1a.
..
..
Extend the side of hose
lb.
1c.
Window SUder Kit lnstaUation
Parts Needed:
A. Panel (x2)
B. Panel with one hole
C. Screw or plastic pin
Assembly
1d.
1. Slide Panel A into Panel B and size to window width (use second Panel A if necessary).
Windows sizes vary. When sizing the window width, be sure that the window kit assembly is
free from gaps when taking measurements. If necessary, cut Panel B
down to size. Cut on the side opposite the hole.
2. Lock the screw into the holes that correspond with the width that your
window requires to ensure that there are no gaps in the window kit
assembly after installation.
3. Use the provided foam seal to fill in any gaps.
Vertical
Window
• •
Window slider
+
Horizontal
Window
..
Window slider
4.
Attach the hose outlet to the window slider kit.
I! c=)I
4
Cut on opposite
side of hole
•
The images shown here are for illustrative purposes only and may be subject to change.
