t
Close doors •
and windows ....
Water drainage method
2.
Close curtafns
3.
Do not
cover
appiiance
When there is excess water condensation inside the unit, the appliance stops running and shows
"Ft".
This indicates that the water condensation needs to be drained using the following
procedures:
Manual Draining
1.
Power off and unplug the unit from power source.
2.
Place a pan (not included) under the lower drain plug.
3.
Remove the lower drain plug.
4.
Water will drain out and collect in the pan (not included).
5.
After the water is drained, replace the lower drain plug
firmly.
6.
Turn on the unit.
Continuous drainage
When unit is running in Dry mode, you can use the method below for continuous drainage.
1.
Power off and unplug the unit from the power source.
2. Remove the drain plug (Fig 1). Be cautious as some residual water may spill during this
setup process.
3. Connect a drain hose (Fig. 2).
Note:
Drain hose is only included on select models.
4. The water can be continuously drained through the hose into a floor drain or bucket.
5. Turn on the unit.
1.
2.
Garden hose or
drainage hose
Note:
A standard
garden hose will
work for continuous
draining. Garden hose.
( is not included. )
(not included)
The image shown here is for illustrative purposes only and may be subject to change.
