TCL MT01+DE200, Руководство по обслуживанию

Страница: 36 / 87

Chassis: MT01+DE200 Reversion: V0
Adjust the temperature in CMP, VGA, AV. Please make sure the picture mode is set to “Stand”, the
“Picture
Æ
Black expand” on the user Menu is set to “OFF”. “Other
Æ
Flesh Tone & Adaptive Luma Control ” on
the factory Menu is set to “OFF”. After Alignment, all the item will change to “ON”
ADC Adjust
：
A. For CMP input, the test signal is 576i/50Hz, 100%, 8 steps colour bar. Select the “Balance
Æ
RGB
Calibrate” on the factory Menu, then press ”
Æ
”., ADC adjust is finished after “OK” is displayed
B. For VGA input, the test signal is 1024
×
768/60Hz
，
white/black grid. Select the “Balance
Æ
RGB
Calibrate” on the factory Menu, then press ”
Æ
”., ADC adjust is finished after “OK” is displayed
1
）． VGA
:
For VGA input, the test signal is 1024
×
768/60Hz
，
16 steps gray bar. Set the “Balance
Æ
Tone” on factory
menu to “Normal”:
A
、
For the third step form the white bar, Adjust the value of
White R、White G、White B, until the color
temperature is x=280±5，y=290±5，Y > 220nit
B
、
For the second step form the black bar, Adjust the value of Gray
R、Gray G、Gray B, until the color
temperature is x=280±5，y=290±5，Y < 25nit
C
、
repeat A&B, until all is ok
D
、
Adjust the value of Black level
2
） ． AV
For AV3 input, the test signal is PAL
，
8 steps gray bar. Set the “Balance
Æ
Tone” on factory menu to
“Normal”:
A
、
For the third step form the white bar, Adjust the value of
White R、White G、White B, until the color
temperature is x=280±5，y=290±5，Y > 220nit
B
、
For the second step form the black bar, Adjust the value of Gray
R、Gray G、Gray B, until the color
temperature is x=280±5，y=290±5，Y < 25nit
C
、
repeat A&B, until all is ok
D
、
Adjust the value of Black level
3
） ． CMP
For CMP input, the test signal is 576i/50Hz
，
16 steps gray bar. Set the “Balance
Æ
Tone” on factory menu to
“Normal”:
A
、
For the third step form the white bar, Adjust the value of
White R、White G、White B, until the color
temperature is x=280±5，y=290±5，Y > 220nit
B
、
For the second step form the black bar, Adjust the value of Gray
R、Gray G、Gray B, until the color
temperature is x=280±5，y=290±5，Y < 25nit
C
、
repeat A&B, until all is ok
D
、
Adjust the value of Black level
4). Adjust the value of Black level
Measurements are using ‘SCALBRI2.UPA’ patterns with -1% to 10% video level bars.
TCL Multimedia Technology Holdings LTD.