8
Connections and Setup
Buttons on the TV
If you cannot locate your remote, you can use the
TV
panel
buttons
on your TV to operate many TV features.
(POWER
button) Turns the TV on or to standby mode.
CH+/-
Selects channels stored in the channel list or acts
as the up/down arrow (
▲/▼
) through the menu
items.
VOL+/-
Increases/decreases the volume or acts as the right/left
arrow(
◄/►
) through the menu items
.
.
(MENU
button)
Bring up the TV’s Main menu
.
(INPUT
button)
Selects the signal source
.
CH
VOL
Explanation of Jacks on TV
This section describes the jacks on the back panel of your TV. There are
several ways to connect components.
Ethernet
(you must connect an Audio adpter cable with
AUDIO OUT Adapter
(you must connect an Audio adpter cable with two color jacks to this adpater jack first, red and
white jacks for R AUDIO and L AUDIO connection)
Use an RCA audio cable to connect your TV to a compatible audio receiver. (not availble in USB mode)
VGA (PC IN)
Connect your computer or other component with a VGA output to this jack using a 15-pin,D-sub cable.
DVI/PC AUDIO IN (used for DVI/PC only)
Provides audio connection when using HDMI/DVI INPUT 1 jack for DVI or
when using VGA (PC IN).
AV 2 IN adapter
Lets you connect a component that has composite video jacks, such as a VCR or DVD player.
(Note
that you must connect an Audio/Video adpter cable with three color jacks to this adapter jack first, Yellow jack for VIDEO
connection, red and white jacks for R AUDIO and L AUDIO connection.
For mono audio sources, be sure to use the L
AUDIO INPUT.
)
ANTENNA/CABLE IN
Lets you connect a coaxial cable to receive the signal from your antenna, cable, or cable box.
CMPT IN (Y Pb Pr) adapter
Lets you connect a component that has component video jacks, such as a DVD player.
(Note that you must connect a Component Video adpter cable with three color jacks to this adapter jack first: Green jack
for Y, Blue jack for Pb and Red jack for Pr )
• Y Pb Pr (Component Video)
Provides good picture quality because the video is separated into three signals. Use
three video-grade or component video cables for the connection.
CMPT AUDIO IN adapter
(Note that you must connect an Audio adpter cable with two color jacks to this adapter jack
first, red and white jacks for R AUDIO and L AUDIO connection. For mono audio sources, be sure to use the L AUDIO
INPUT.)
Ethernet
AUDIO OUT
adapter
DVI/PC
AUDIO IN
AV 2 IN
adapter
ANTENNA
/CABLE/SAT IN
CMPT IN
adapter
CMPT AUDIO
IN adapter
PC IN
