TCL LCD2326LV, Руководство по обслуживанию, Страница: 22 / 39

Select “Edid Table” item, and click “Read” button. Then a dialog box is pop-up.
Select TTE1726_ANALOG file and open it.
Click “Write edid” to load the data.
After the bar is full, the loading is successfully completed. If the hint “Check is error! Try again!” is
pop-up, the loading is failed and check the connector, then repeat the steps again.
3) Loading DDC data in DVI mode:
Plug the DVI connector to the DVI port of the TV set and DDC loading board.
The method is the same to that in VGA mode.
7. Setting in the Factory mode:
1) In UOC3 Factory Mode:
Address Register Default Description
000 LatAmUSA TVSub Version of UOC3 Software
001 Init TV 0 1: Initialization of EEPROM
002 ISP Mode 0 1: Enter the mode of updating on line
013 PV-CL-MV 31 Color of Film picture mode
014 PV-SH-MV 37 Sharpness of Film picture mode
015 PV-CL-SP 35 Color of Motion picture mode
016 PV-SH-SP 39 Sharpness of Motion picture mode
017 PV-CL-WK 20 Color of Soft picture mode
018 PV-SH-WK 31 Sharpness of Soft picture mode
019 PV-CL-GA 24 Color of Game picture mode
020 PV-SH-GA 48 Sharpness of Game picture mode
022 YNTSC 2 Y delay in NTSC
023 YPAL 2 Y delay in PAL
050 OP AUDIO CONFIG 2 Version of IC
057 OP BBE 0 BBE
116 Curve 001 26 Sound curve. 1%
117 Curve 002 37 Sound curve. 2%
118 Curve 003 47 Sound curve. 3%
119 Curve 004 55 Sound curve. 4%
120 Cu rve 005 60 Sound curve. 5%
121 Curve 006 66 Sound curve. 6%
122 Curve 007 71 Sound curve. 7%
123 Curve 008 76 Sound curve. 8%
124 Curve 009 82 Sound curve. 9%
125 Curve 010 87 Sound curve. 10%
126 Curve 020 135 Sound curve. 20%
127 Curve 030 161 Sound curve. 30%
128 Curve 040 178 Sound curve. 40%
129 Curve 080 199 Sound curve. 80%
130 Curve 100 210 Sound curve. 100%
132 AGC Take over 27 AGC
157 PWRON-STANDBY 0
0: Standby after switch on
1: Power up directly
22