TCL L49E7800UDS, Руководство пользователя

Страница: 12 / 34

Date 2013/12/2
Page
12
- 8 -
- 8 -
Index
Draft
of 12 Pages Name

There is only one item: the project ID, press the Left or right can change the project ID and will display
this project hardware information.
8 ALL THE P-MODE MENU AND SETTING:
8.1 Main\Factory
ITEM STATE COMMENT REMARK
Factory mode
hotkey
OFF
when set On, we can enter
factory menu with
pressing”OK”on remote
control directly.
Factory out :OFF
Burning Mode OFF
Aging mode ON:The
flashingcharacter‘PW’and
the time of aging display on
the below-left of the screen.
Only in TV source will
display noise picture
when WARM-UP set on
Disable on designer mode
Factory out :OFF
ADC .........
No need
White Balance ........
For bright and low
luminance level adjust
Reset Shop DO
Initialize production.
Do it at the last position
of the product line,
HOTKEY will be disable.
Reset All DO
Factory mode data reset
It will be done before
shop initial if need
Power Mode LAST
STB: Standby
ON: power on directly
when plugging in the wire.
LAST: For last memory
power on/off mode
Set “On” when aging in
the test, and set “Last”
when factory out.
USB Clone ..............
Use the USB to Clone
NVM Data From USB or
To USB. we can enter the
menu after pressing”OK”on
remote control directly.
Other ..............
8.1.1 White Balance….
White Balance…
ITEM COMMENT REMARK
White
balance Init
DO
Press ‘OK’on RC to
finish