TCL L32M61A3, Руководство по обслуживанию

Страница: 15 / 79

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
When aging the set, please setting “WARM UP STATUS” at “ON” in
PRODUCTION
menu,
and enter “SET UP” menu to set.
Setting “Power Mode” at ON if need power on directly.
Setting “Power Mode” at STB if need aging the set in standby status.
5 Production Adjusting Item
ƻ
1
ADC adjustment
The chassis can execute ADC auto-tune if in YPbPr / PC sourcing.
Enter Factory Menu, select YPbPr / PC in Source item, then select AUTOTUNE in ADC ADJ,
press V+ to run, waiting for about 5 seconds until “OK” displayed, which means the set finish
the ADC adjustment, and quit.
YPbPr sourcing, please apply ƾ 100 ˁ color bar pattern ƾ
PC sourcing, please apply
ƾ
16-scale grey pattern
ƾ
Remark: Please make sure ADC adjustment have done successfully before White
balance adjustment.
ƻ
2
White Balance adjustment
Please adjust the NORMAL, WARM, COOL temperature in White balance according to
company regular.
Please make sure ADC adjustment have done successfully before White balance adjustment,
and select the picture mode at “NATURAL”.
White balance adjustment should under three different sourcing:
AV/TV/SVIDEO ƾ sourcing reunification under the AV adjustment:
please apply ƾ NTSC-M system 8-scale grey pattern ƾ
ƾ YPbPr/HDMI sourcing reunification under the YPbPr adjustment:
please apply
ƾ
16-scale grey pattern
ƾ
ƾ
PC sourcing should adjust singly
please apply
ƾ
16-scale grey pattern
ƾ
TCL factory can adjust white balance according to actory working instruction and tools .
If need manual adjustment, please operate in
WB
page in factory menu.
Chassis Name Serial No.
Issued on Page
Updated on Version