TCL L32M61A3, Руководство по обслуживанию

Страница: 13 / 79

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
Chassis Name Serial No.
Issued on Page
Updated on Version
Item Sub-Item Description Works
PRODUCTING
Should adjust while assembling the set. OK
FACTURY HOT
KEY Short-cut key to enter factory mode setting:
GO BACK is the short-cut key if it is “ON”.
Do remember to set it at “OFF” if it out going.
OK
WARM UP
STATUS Aging Mode setting:
“ON” means Snow Picture showing instead of Blue
Background if there is no signal input.
Do remember to set it at “OFF” if it out going.
OK
EEPROM INIT EEPROM initialization:
1. When the first time to fires up the set, please
enter this menu and initialize it.
2. Press Left/Righ key and waiting for about 5
seconds until “OK” displayed, which means the set
finish the initialization.
3. switch off AC power
4. Power On it again, the EEPROM initialized.
5. Continue other alignment.
OK
STRUCTURE Model No. Choose:
The software is compatible with a number of
models, such as:E62 for <L32E77S3 L32E62S3>,
M61-M71 for <L32M61S3, L32M71S3>
1. Choose the correct model No.
2. Power off, then Power on the set to make the
setting works.
OK
LOGO LOGO Displayed or not.
ON:TCL LOGO displayed when turn on the set.
OFF: LOGO disappears.