TCL FC060BW2510GR, Руководство пользователя, Страница: 13 / 61

Install Washing Machine
Connect the power
WARNING
NOTE
1.This machine must be earthed properly. If there is any short circuit,
earthing can reduce the danger of electrical shock.
2.Washing machine shall be operated in a circuit separate from other
electrical appliances. Otherwise , power protector may be tripped or fuse
may be burned out.
Operate Washing Machine
Ensure your machine is installed properly before use.
Before washing clothes for the first time, you must run a complete cycle without
clothes. To do this:
1.Connect power source and water.
2.Put a little detergent(about 10g) into the drawer and close it.
3.Press the On/Off button.
4.Turn the knob to the “Cotton”.
5.Press the Start/Pause button.
This will remove any water from the manufacturer’s test run remaining
in the machine.
Ÿ
As the maximum current through the unit is 10A when you
are using its heating function, please make sure the power
supply system (current, power voltage and wire) at your
home can meet the normal loading requirements of the
electrical appliances.
Ÿ
Please connect the power to a socket which is correctly
installed and properly earthed.
Ÿ
Make sure the power voltage at your plate is same to that in
the machine’s rated voltage.
Ÿ
Power plug must match the socket.
Ÿ
Do not use multi-purpose plug or socket as extension cord.
Ÿ Do not connect and pull out plug with wet hands.
Ÿ
When pulling out the plug, hold the plug tightlly and then pull
it out. Do not pull power cord forcibly.
Ÿ
If power cord is damaged or has any sign of being broken,
special power cord must be selected or purchased from its
manufacturer or service center for replacement.