TCL FC060BW2510GR, Руководство пользователя

Страница: 10 / 61

Install Washing Machine
We recommend that your new washer should to installed by a qualified appliance technician.If
you feel that you have the skills to install the washer,please read the installation instructions
carefully before installing.
■ Tools needed
You may need to have the following tools to help you in the installation of your washer:
• Scissors • Pliers
• Gloves • Spanner
• Standard Screwdriver
■ Unpacking the washing machine
Unpacking your washing machine and check if is there any damage during the
transportation.Also make sure that all the the items(as shown below) in the attached bag are
received. If there is any damage to the washing machine during the transportation,or any item
is missing or damaged,please contact the local dealer immediately. If your washing machine is
not double inlet, you do not have the hot inlet hose.
Inlet Hose
(Connect to
cold water
supply)
Hot Inlet Hose
(Connect to Hot
water supply)
Hole Cover (4EA)
(Used to plug
transit bolt holes)
Drain Hose Support
Bracket
(Used to loop the
end of drain hose)
Spanner
(1.Used to adjust the bottom of
the machine,
2.Remove the transport bolt on
the back of the machine)
*lf washing machine is not double inlet, the machine does not have the hot inlet hose.
■ Select the location
Before installing the washer,the location characterized as follows shall be
selected:
-Rigid,dry,and level surface(if not level,please make it level with reference to the
following figure ’Adjustab le Leg’).
-Avoid direct sun light.
-Sufficient ventilation.
-The ambient temperature shall be between 0-40°C.
-The ambient humidity shall be below 95%(When the temperature is 25°C).
-Keep far away from the heat resources such as coal or gas.Make sure that the
washer will not stand on power cord.Do not install the washer on the carpet floor.
NOTE