14
enter the super password to override any existing
codes.
Using the Hands-free TV Voice
Control
Note:
This feature is only available in Google TV mode.
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access the
Google website first. Then follow the steps below to
access.
1. Turn the built-in MIC switch (next to the power button)
to on before using this function.
2. In Google TV mode, press the Google Assistant
button on your remote.
3. Select “Yes, I'm in”.
4. Say “OK Google” or “Hey Google” to activate it.
Notes
:
-
The availability of hands-free TV voice control
depends on your region/country/language and your
model. For details, please refer to your local dealer.
-
A quiet surrounding is required for better function
when using it. The recommended distance for using
the hands-free TV voice control is within 2 meters in
front of TV set.
-
Turn the built-in MIC switch to off if you are not going
to use it.
-
Standby power consumption will increase because
the built-in MIC is always listening when the Google
Assistant or voice control with the built-in MIC is
enabled.
Gesture Control
(*Not available for some models)
Allows you to control TV device by doing gestures in
some specific scenarios.
Notes:
-
This feature is available only when TV is equipped
with a camera of the designated type. For details,
please consult TCL Customer Service or your place
of purchase.
-
Ensure the normal connection between the camera
and TV and that the toggle switch is set to
while
using this product.
-
The camera powers on automatically when you start
corresponding applications on TV.
-
The camera powers off automatically when you exit
corresponding applications on TV.
-
You may keep the slide cover closed when you are
not using the camera to protect the lens from dust.
Press button on the TV remote control, select
(Settings) > Privacy > Gesture Control
and press
OK
to enter. Select your preferred gesture functions and
changing the channel or source.
- The TV cannot play files normally if the parameters
of the file exceed the limitations of the system, the
file format is not supported, the file is damaged, or
the file cannot be decoded.
- Do not disconnect the USB drive when the system
is reading a file or transmitting data, otherwise the
system or the drive may be damaged.
MagiConnect
MagiConnect, formerly named T-Cast, lets you enjoy
plenty of videos
,
rich of applications, and share great
contents on large screen. It also allows you to turn a
smart device into a sophisticated remote control, provid-
ing more features than your normal TV remote control.
You can then control your TV through your smart
device.
Follow the on-screen instructions to scan the QR code
on the TV screen and download MagiConnect.
Note:
Make sure the smart device and your TV are
in the same home LAN (local area network) or
network segment to use TV remote function.
Reset Shop
Allows you to reset the TV to factory default settings.
1.
Press on the remote control
to display the
dashboard,
select
(Settings)
>
System
>
About
>
Reset
>
Factory reset
and press
OK
to enter.
2.
Select the
Factory reset
option and press
OK
to
enter. Then select
Delete everything
and press
OK
to confirm.
3.
Enter 1234 or the PIN according to the on-screen
prompt.
4.
Select
OK
and press
OK
to confirm.
5.
The
Initial setup
wizard appears. Follow the
instructions in the section
Initial setup
.
Netflix
Settings
Netflix provides on-demand movies and TV shows
delivered via the Internet. Netflix is available in certain
countries.Unlimited membership is required. More
information can be found at www.netflix.com <http://
www.netflix.com/>.
Note:
You can directly access Netflix via clicking the
NETFLIX
button on the remote control.
Password in Parental Control
• The default password is 1234. You can change it to a
new one.
• The super password is 0423. If you forget your code,
Using More of Your TV
