15
• Eco Mode –
In Eco mode, the unit will turn off once the room is cooled to the user-set
temperature. The unit will turn back on when the room temperature rises above the user-set
temperature. While in Eco mode, the fan will occasionally turn on for a few seconds in order to
take an accurate temperature reading. (Cool/Dry mode only)
• Fan Mode –
Fan Mode helps to circulate air in your home, but only works when the air
conditioner is vented.
• Fan Speed –
Press the Fan Speed button to choose the fan speed options. You can choose Hi,
Med, Lo or auto speed in cool mode and choose Hi, Med, Lo in fan mode.
• Dry Mode –
This function reduces the humidity of the air to make the room more comfortable.
Press the Mode button to set to Dry mode. An automatic function of alternating cooling cycles
and air fan is activated.
5.
Timer Button –
press the Timer button on the panel or the Timer button on the remote to set
the timer.
• Set Timer On:
With the AC off, press the Timer button and then use the
and
buttons to set the desired temperature. Press the Timer button again and
use the
and
buttons to set the desired amount of time before the AC turns on.
Press the timer button again to start the countdown.
• Set Timer Off:
With the AC on, press the Timer button and then use the
and
buttons to set the length of time before the AC will turn off. Press the timer button again
to start the countdown.
Note:
It can be set to automatically turn off or on in 0.5-24 hours. Each press of the buttons will
increase or decrease the timer. The Timer can be set in 0.5 hour increments below 10 hours and 1
hour increments for 10 hours or above.
The Set light will turn on while setting. To cancel the set function, press the Timer button again.
6.
Sleep Button
–
In Sleep mode, all of the display lights will turn off after a while, but the Sleep
light stays on. In Sleep mode, the air conditioner will automatically adjust the temperature and
fan speed to make the room more comfortable during the night.
7.
Filter Button –
After the fan motor has run for 500 total hours, the Filter Check light will turn
on to remind the user to clean the filter. After you clean the filter, you can turn off the light by
pressing the Filter button.
Remove the filter by removing the air intake grille using the two notches on the top left and
right side of the grille cover. Once the grille is removed,
you can then remove the filter. Gently wash it with a mild
dish washing detergent and let dry completely before
reinstalling it into the AC.
Normal Operating Sounds
You may hear a pinging noise, caused by the water hitting the
condenser on rainy days, or when the humidity is high. This
design feature helps remove moisture and increase efficiency.
You may hear the thermostat click when the compressor cycles on and off. Water will collect in the
base pan on rainy days, or high humidity days. The water may overflow and drip from the unit on the
outside. The fan may run, even when the compressor is not on.
Remove filter
Remove filter