3.
ASSEMBLY
Warning! Ensure the battery is disconnected from the tool before performing any of the
following operations
The clamping jaw allows branches to be gripped, providing cutting of unsupported
branches easier. When cutting wider branches or timber, the clamping jaw can be
removed and the garden saw can be used as a standard reciprocating saw.
a. Fitting the Clamping Jaw
The clamping jaw cannot be fitted or removed with the blade fitted. If the blade is fitted,
first remove the blade and then follow the steps below.
Align the upper tab of the clamping jaw with
the hole in the saw housing.
Press and hold the locking button for
clamping jaw release into the unlock position.
Push the clamping jaw tab into the hole in the
housing and release the locking button for
clamping jaw.
Note: Ensure the clamp is secured by pulling the clamp away from the body.
