TCi MotorShield MSD0009A300 Скачать руководство пользователя страница 22

Страница: 22 / 25

MSD Manual

6.0 Maintenance and Service

Reliability and Service Life

The MotorShield

™

has been designed to provide a service life that equals or exceeds the life of

the variable frequency drive. It has been thoroughly tested at the factory to ensure that it will

perform reliably from the moment it is put into service. The following periodic maintenance is

recommended to ensure that the MotorShield

™

will always perform reliably and provide the

expected service life.

Periodic Maintenance

Warning

Only qualified electricians should carry out all electrical installation and maintenance

work on the MotorShield™.
Disconnect all sources of power to the VFD and MotorShield™ before working on the

equipment. Do not attempt any work on a powered MotorShield™.

•

Check to see that the installation environment remains free from exposure to excessive dirt and

contaminants. Refer to the

Pre-installation Planning

section of this manual.

•

Check to make sure that the enclosure ventilation openings are clean and unobstructed.

•

Inspect the interior of the enclosure for signs of overheated components. Clean the interior of the

enclosure whenever excess dirt has accumulated.

•

Check the integrity of all power and ground connections.

•

All electrical connections must be re-torqued annually.

Содержание MotorShield MSD0009A300


























Результаты поиска

Содержание MotorShield MSD0009A300

Отзывы:

Похожие инструкции для MotorShield MSD0009A300

Бренды по названию

Популярные бренды

TCi MotorShield MSD0009A300, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание MotorShield MSD0009A300

Отзывы:

Похожие инструкции для MotorShield MSD0009A300

Бренды по названию

Популярные бренды