TCi HarmonicGuard HGL Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 43 / 52

HGL Manual 5.0 PQconnect Connectivity
37
Read Parameters:
Table 26: Network Interface OUTPUT/Feedback Register Map
Parameter Name
I/O Reg
Address
Offset
Direction Data Values and Examples Description
MB_PARITY_RO 302 Output
0 = None
1 = Odd
DEFAULT: 2 = Even
Modbus Parity
RELAY_INPUT_STATUS 320 Output
0 = Enabled
DEFAULT: 1 = Disabled
Digital relay status
RELAY_INPUT_1_CONFIG_RO 321 Output
DEFAULT:
0 = Disabled
1 = Tuning Reactor Thermal
Switch Input
2 = Line Reactor Thermal
Switch Input
3 = Reset Command
4 = External Control Input
Customer external control input 1
RELAY_INPUT_2_CONFIG_RO 322 Output
DEFAULT:
0 = Disabled
1 = Tuning Reactor Thermal
Switch Input
2 = Line Reactor Thermal
Switch Input
3 = Reset Command
4 = External Control Input
Customer external control input 2
SYS_SERIAL_NUM_2_RO 350 Output
Parameter contains UUUU in
the UUUULLLL-NN serial
number format.
Unit serial number section - upper 16 bits
of 32-bit unit job number
SYS_SERIAL_NUM_1_RO 351 Output
Parameter contains LLLL in the
UUUULLLL-NN serial number
format.
Unit serial number section - lower 16 bits
of 32-bit unit job number
SYS_SERIAL_NUM_0_RO 352 Output
Parameter contains NN in the
UUUULLLL- NN serial number
format.
Unit serial number section - two-digit unit
number
SYS_NULL_STAT 400 Output
0 = Not calibrated
1 = Unit is calibrated
System auto null status *
SYS_NULL_TMR 401 Output
0 = Unit is not calibrating
1 = Unit is Calibrating
System null timer; indicates whether the
unit is calibrating*
SYS_INT_HB 402 Output Range: 0 to 65535
Processor internal heartbeat. Internal
counter that counts and rolls over to zero
used to verify processor clock operation. *
SYS_BG_HB 403 Output Range: 0 to 65535
Processor background heartbeat. Internal
counter that counts and rolls over to zero
used to verify processor clock operation *