Ludwig-Rinn-Straße 10-14 • D- 35452 Heuchelheim/Gießen • Phone: +49 6 41-9 62 84-0 • Fax: +49 6 41-9 62 84-28 • www.tci.de
Seite 15 von 24
!
3.4 Mounting
Please attend of professional mounting by authorisied personal. Furthermore the
system must be separate from the electricity supply and so that voltage free.
Follow these points by the mounting
1. After unpacking first place the unit with the surface on one inlet of the packaging.
Therefore you can protect the chassis against damaging!
2. Remove the screews of the cover on the rear side. Remove the cover.
3. If you haven‘t ordered the mounting arm flanch, you have to mount it now.
4. Insert now the connection wires into the housing and connect them like in chapter 3.3.
For protect the wires please use the strain relief.
5. Please close now the rear side with the cover again, please attend to the correct seat
of the sealing, because the protection class can‘t be reached.
