3
WARNING – risk of scalds/burns
Do not touch the coffee spout during or immediately after
•
use. Avoid contact with coffee being dispensed from the
spout.
Do not raise the lever while the machine is being used.
•
Keep the capsule opening closed and do not pull out the
used capsule container.
CAUTION – risk of injuries or material damage
Use only original Tchibo Cafissimo capsules
. Neither use
•
capsules from other manufacturers, nor damaged or mis-
shapen capsules, and never fill capsules or the machine
with ground coffee or instant coffee, as this would damage
the machine. In these cases, any necessary repairs would
not be covered by the warranty.
Only use the machine with the used capsule container and
•
drip grid inserted.
Always pour fresh, cold tap or other drinking water into the
•
water tank. Do not use carbonated mineral water or any
other liquids.
Descale the machine as soon as the machine indicates that
•
this is necessary.
The capsule opening contains two capsule punchers. These
•
punchers pierce both sides of the capsule when the lever
is pressed down. Never reach into the capsule opening.
Keep your fingers and any objects away from the capsule
opening as you fold down the lever.
Do not lift the machine up by the lever. To move the
•
machine, hold it by the outer casing.
Place the machine on a solid, level surface that is well
•
illuminated and resistant to water and heat.
To ensure that the casing does not melt, do not place
•
the machine on a hob or immediately next to a hot oven,
radiator or anything similar.
Route the mains cord in such a way that it cannot be
•
tripped over. Do not let the mains cord hang down from the
surface the machine is put on so that the machine cannot
be pulled down by it.
Keep all cards with magnetic strips, such as credit cards,
•
debit cards, etc. away from the front drawer, used capsule
container and the drip tray, as well as all built-in magnets.
The cards could become damaged. Also keep magnetic
memory storage media and all devices that are affected
by magnetism or may sustain functional impairment away
from the machine.
The machine is equipped with non-slip feet. Work surfaces
•
often have varnished or plastic finishes and are treated
with a variety of care products. Some of these may contain
substances that react adversely to the non-slip feet and
soften them. If necessary, place a non-slip mat under the
machine.
The machine must not be exposed to temperatures
•
below 4°C. Residual water in the heating system could
freeze and cause damage.
