22
Prior to first use
Remove the protective films from the device and
m
the smartphone stand.
Inserting the back-up battery
The back-up battery ensures that the settings of the clock and alarm and
the stored stations are not affected in the case of a mains failure or when
the device is disconnected from the mains.
• The back-up battery is not required to use the product.
• Using the product with the battery but without being connected
to a mains power supply is not possible.
1. Remove the screw from the battery com-
partment lid and take the lid off.
2. Insert the battery provided. Pay attention
to the polarity (+/–).
The positive terminal must face upwards!
3. Replace the battery compartment lid and
tighten the screw firmly.
Set-up and connection
1. Place the device onto a solid, level surface.
2. Fully unwind the wire antenna. Fasten the
end of the antenna as high as possible to
a wall or a piece of furniture. Use adhesive
tape if necessary.
3. Connect the mains adapter to the connec-
tion socket
DC IN
on the back of the device
and insert the mains plug into an easily
accessible wall socket.
OFF DC IN
AUX IN
22
Back
ON OFF DC IN
AUX IN
On/Off switch
ON OFF
Connection socket for
mains adapter
DC IN
Audio connection
socket
AUX IN
Back-up battery
Battery compart-
ment for the
back-up battery
USB connection
socket to charge
mobile devices
(e.g. smart phones,
etc.)
83641 en Smartphone_Dockingstation_v5 09.12.15 10:57 Seite 22
