T61 Smart Modem
Page 42 of 47
User Guide V1.4
9
Application Notes
9.1
T61 Firmware Update
For the cases that there is a need to patch up the firmware of T61 devices, Center Manager software
provides two convenient ways of doing it. One way is to use direct wire. It is a faster way but devices
need to be connected to Center Manager using RS232 cable. Another way is to update via TCP
connection. This is a slower but it becomes very handy if the devices are deployed at remote. In both
cases, Center Manager software is mandatory. Please refer to the following sections for more
details.
9.1.1
Direct Wire Firmware Update
Contact us to get the latest firmware. The file should be named “main.bin”. Save the file in a
directory.
Select “Direct Wire Configuration…” from “Configuration” Tab.
Power up the T61 device
Select the COM port connecting the T61 device to your PC and click on “Connect” button
Wait for the device to be connected, which will be reflecting after “Device Status”.
Click on “Firmware Update” button which becomes available when device is successfully to
Center Manager.
Browse to select the firmware file saved and click on “Update Firmware” button.
When the update is finished you will see the following notice and please click on “OK” to
proceed. Otherwise, if it notices that firmware update is not successful, you can simply do it
