TC Works SPARK LE, Руководство пользователя, Страница: 37 / 65

Which mode you prefer will probably depend on the way you are working, but as you can
see, the “Extending” mode might be the better choice for cutting music:You cut your source
audio into regions fitting to bars and beats, and with the extending crossfades you then
smooth the cuts without changing the music sections’ time position, whereas the “Overlapping”
crossfades might be the better choice for speech editing, as you don’t add audio in front or
at the end of a region, to make a crossfade – the crossfade will actually move the regions
closer together.
The Place setting allows you to change the track index setting for CD Burning:You can select
between three settings:
“Pre” will set the index to the starting point of the crossfade,“Center” will set it to the middle
of the crossfade, and “Post” finally will set it right behind the crossfade. In “Overlapping”
mode, these settings will not influence the crossfade itself!
In “Extending” mode, the Place parameter has a different function. It will not set the index
placement of the track index, but will define the placement of the crossfade:
Pre:The next entry will be extended forward.The first entry will remain unchanged in length.
Center: Both entries will be extended symmetrically.
37
B R O W S E R V I E W
2
Pre-splice
Entry A Entry B
Centered Post-splice
R E G I O N 2
R E G I O N 1
R E G I O N 1
R E G I O N 2
2_BrowserView_neu 20.06.2002 13:58 Uhr Seite 37