TC Works SPARK LE, Руководство пользователя

Страница: 28 / 65

P
ROCESS
SPARK LE’s off-line “Process” menu supplies you with the key DSP function for destructive
editing. First, select the audio you want to process in the Wave Editor, then choose the
desired function:
F
ADE
...
Create a fade-in or fade-out on a selection. Make a
selection at the desired fade position and choose “Fade”
from the Process Menu (or press <COMMAND
+
F>).
Select the Fade In/Out type and further adjustments of the
fade. Finally, press “OK” to process the fade to the file.
Depending on where you are in an audio file, the direction
of the fade will automatically be selected for you. If you
are with in the first half of the file, the fade will
automatically be set to "Fade In”. If you are with in the
second half of the file, the fade will automatically be set to
"Fade Out”.
F
ADE
O
PTIONS
Offset/Damping - With the “Offset” and “Damping” controls, you can adjust the fade curve:
“Offset” defines the position in the crossfade. 0% is the beginning of the fade, 100% is the
end.With “Damping”, the damping at the position defined by “Offset” is set.
“Direction” lets you select if the fade should be a fade-in or fade-out.
There is also a small choice of fade presets, that can be recalled from the “Presets” pop-up.
Also, the selection can be adjusted in the fade dialog itself: Set the selection start time, end
time or the fade duration.The “Channels” lets you select if you want to have the fade on the
left, right or both channels.
C
HANGE
G
AIN
...
To change the level of the selected audio part, open gain from Process Menu (or
press <C G>) and set the gain change with the fader.The level can
be boosted up to +18dB!
28
B R O W S E R V I E W
2
2_BrowserView_neu 20.06.2002 13:58 Uhr Seite 28