9
PEQ 3000 User Manual
• •
"Add Band" will add an extra band to the view until a maximum of
12 bands are shown. Bands can also be added by double clicking in
the main view, at the frequency and gain that you want to affect.
The default added band is a Bell curve with 1.5 octave width
• •
"Remove Band" will remove the selected band from the view
Global Section
• •
Mono, Stereo, Mid/Side or Left/Right: On a Stereo channel either Stereo,
Mid/Side, or Left/Right operation can be selected in the Global section
of one plug-in instance. Two plug-in instances in series are needed to
make EQ adjustments, for example, in both Stereo and Mid/Side. In the
case of a mono instance, the output signal is made by outputting the
left plug-in channel only
• •
Master is the output gain of the EQ. Range: +/- 16 dB
• •
COPY will copy all band settings from Mid to Side or Left to Right
• •
FLAT will set all currently-shown bands to 0 dB
• •
BYPASS will engage/disengage the PEQ 3000
Phase Section
• •
The Phase pane holds the parameters for the Phase EQ. See Phase
(All Pass Filter) for details on how to use it
At the right hand edge:
• •
Input meters and Output meters
At the bottom left:
• •
Connection status "Chain" icon
• •
Connection status message and Tool Tips
At the bottom middle/right:
• •
Preset number, preset name, factory or user, favorite, preset up/down
• •
Setup
• •
Shopping cart
At the bottom right corner:
• •
User Interface size adjustment
The controls and features are described in more detail below.
5.1 Key Commands, for fast workflow
• •
Enable/disable band:
Double-click handle (Mac/Win)
• •
Add band:
Double-click view (Mac/Win)
• •
Reset band (gain = 0):
click (Mac) / Alt + click (Win)
• •
Move freq + gain:
Mouse drag (no modifier key) (Mac/Win)
• •
Move gain only (lock freq): Shift + mouse drag (Mac/Win)
• •
Move freq only (lock gain): drag (Mac) / Alt + drag (Win)
• •
Change width/slope:
C drag (Mac) / Ctrl + drag (Win)
5.2 EQ In/Bypass and Band In/Bypass
Press this button to bypass or engage the PEQ 3000. This makes it easy for you to
listen and compare the overall effect of your work.
Alternatively, individual bands may be turned on and off using the Band In/
Bypass button, after selecting the band. This is useful to audition the effect of
each band and its settings.
EQ In
EQ Bypass
Band Bypass
Band In
Содержание TC ICON Series
Страница 24: ......
