TC Electronic RebelHead450, Руководство пользователя

Страница: 16 / 22

1 – MAINS IN – Power In & POWER switch
The RebelHead’s auto-sensing switchmode power-supply
accepts any mains voltage from 90 to 240 volts – you do not
have to change settings, fuses or anything else. Simply connect
a standard IEC three pin connector to the local mains voltage,
and you are up and running. This is particularly handy when you
use the RebelHead on a tour.
The ground pin of the PSU must be connected in order to
avoid voltage differences between e.g. the PA and the
RebelHead.
2 – SPEAKER OUT
Use the SPEAKER OUT combo connector for connecting the
RebelHead to your cabinet(s). You can use a speaker cable with
either Speakon or ¼" jacks. Do NOT use instrument cables!
The RebelHead can be used to drive any cabinet combination of
up to three RebelStack 210/212 units, or any other cabinet
combination with a 4 Ohm minimum load.
OPERATION – REAR PANEL
14
Rear Panel