TC Electronic M5000, Руководство пользователя, Страница: 74 / 203

ALGORITHMS
M5DYN
Rev 1.1 Page 3
REVERB-1 algorithm). Provided that
the predelay setting is relatively short,
the corresponding volume of the
simulated space is changed radically
with this control. For example; with the
HALL initial pattern, the approximate
room volume goes from 1.2 cubic meters
to 1,280,000 cubic meters.
PREDLY 0.0 - 100.0 mS Sets the time that passes before the first
reflection appears. Maximum predelay
depends on SHAPE (see table 2 in
REVERB-1 algorithm text module).
Increasing the predelay will change the
apparent position and, to some degree,
the size of the room.
WIDTH 0 - 100 % Sets the apparent stereo width of the
reflections. At '0', the reflections will
appear to be coming mainly from the
center (mono), whereas with WIDTH set
to '100' the L/R are independent (and
mono compatible).
LOCUT 20 Hz - 1.00 KHz Low cut filter, shelving type. Provides an
overall low frequency rolloff (6 dB per
octave). Sets the cutoff frequency of the
overall high cut filter in 1/3-octave steps.
ATT -40 - 0.0 dB The attenuation control sets the low
frequency roll determined by LOCUT.
HICUT 1.00 KHz - flat High cut filter, shelving type. Provides
an overall high frequency rolloff (6 dB
per octave). Sets the cutoff frequency of
the overall high cut filter in 1/3-octave
steps.
ATT -40 - 0.0 dB The attenuation control sets the high
frequency roll determined by HICUT.
SPEED 0.100 - 10 Hz Adding modulation to the ambience has
the effect of smoothing out the frequency
response, by effectively averaging out
the room resonances. Note that adding
even the least amount of modulation will
cause the very high frequencies to
diminish slightly and some detuning to
occur.