TC Electronic M-ONE, Руководство пользователя

Страница: 14 / 46

12
UTILITY & MIDI
Utility
Basic operation
• Press the UTILITY key to enter the local
setup parameters of the M•ONE.
• Use the ARROW keys to select parameters
and the CONTROL wheel to change
parameter values.
All changes are instantly effective in the Utility
menu.
MIDI Channel
Sets the responding MIDI channel of the
M•ONE.
Range: Off/1-16/Omni.
MIDI CC
Determines whether the M•ONE should
respond to MIDI Continuous Controllers or not.
Range: On/Off.
MIDI Bulk Dump
Press ENTER to perform a Bulk Dump of all
presets to an external MIDI device. The
M•ONE is always ready to receive MIDI Bulk
Dump information.
MIDI Sys-Ex ID
Determines the Sys-Ex ID number of the unit.
All effects parameters; algo changes and
routings can be changed through MIDI Sys-Ex
via an external MIDI device. In order to define
which unit the sent MIDI Sys-Ex information
should reach, the appropriate ID number must
be set.
Program Bank
Determines which bank an external MIDI
device will address in the M•ONE when
sending a program change.
The options are: Factory, User or External.
When External is selected controller #32 can
be used to address either the Factory or the
User bank.
M•One (standard)
Factory bank:
Controller #0=0
User bank: Controller #0=1
M•One XL
Factory bank 1-100:
Controller #0=0
Factory bank 101-200: Controller #0=1
User bank 1-100: Controller #0=2
Routing Lock
Locks the current Routing, meaning that the
current selected routing will act as a “global
routing” and that “preset routings” will not take
effect when presets are recalled.
Tap Unit
Selects whether the Tapped tempo in the Tap
menu should be displayed in ms (milliseconds)
or BPM (Beats Per Minute).
Bypass Mode
There are three different Bypass modes:
0% Mix
The Input signal is passed directly to the
Output.
FX Input
Shuts off the Engine Input in order to let the
effect "ring out", but leaves the same amount
of dry signal through the unit.
FX Output
Shuts off the Engine Output in order to kill the
FX instantaneously, but leave the same
amount of dry signal coming through.
Pedal setup
Sets the function of the back panel Pedal jack.
The Pedal Input uses momentary switches
only.
Range: Bypass 1, Bypass 2, Bypass 1&2, Tap.
Viewing Angle
Adjusts the LCD display backlight for better
viewing comfort.