46
47
SELF TEST
PRESS THE BYPASS KEY WHILE POWERING UP, TO
ACCESS THE RESET MENU AND SELECT ÈRUN TEST
PROGRAMÇ
Turn the ADJUST wheel to scroll through self tests.
KEY test
Select Key test by pressing OK.
The keys must be pressed in the order they are requested by the
Finalizer to pass the test.
Press OK key again to exit test.
ADJUST wheel
Select ADJUST wheel test by pressing OK.
Turn the ADJUST wheel to 30 and back to 0 to pass test.
Press OK key again to exit test.
LED test
Select LED test by pressing OK.
Turn ADJUST wheel to test the LEDs. The test is “ok” when all
LEDs are lit.
Press OK key again to exit test.
Display test
Select Display test by pressing OK.
Press OK to check that all pixels are lit. Press any key to leave
the pixel test.
Press OK key again to exit test.
Analog I/O test
Select Analog I/O test by pressing OK.
Connect a Finalizer Analog Output to the Finalizer Analog Input,
which has to be tested and press OK.
Use a balanced cable.
PPM must show -12dB to pass test.
Press the HELP key to exit test.
Digital I/O test
Select Digital I/O test by pressing OK.
Connect the Finalizer’s AES/EBU Output to the Finalizer’s
AES/EBU Input and press OK.
Connect the Finalizer’s S/PDIF Output to the Finalizer’s S/PDIF
Input and press OK.
Connect the Finalizer’s ADAT Output to the Finalizer’s ADAT
Input and press OK.
PPM must show 0dB to pass test.
Press the HELP key again to exit test.
MIDI I/O test
Select MIDI I/O test by pressing OK.
Connect MIDI out to MIDI In.
Prg. change 1-128 is sent out on MIDI thru. Connect this socket
to a MIDI compatible device and confirm the Prg. changes.
Press the HELP key to exit test.
Pedal test
Select Pedal test by pressing OK.
Connect a momentary pedal to the pedal socket.
When pressing the pedal, the result should be OK.
When released, the result should be NOT OK.
Press the HELP key to exit test.
PC card test
Select PC card test by pressing OK.
Insert PC card. Note that all data on the PC card will be
destroyed.
Press OK to test.
Result reads:
Low battery - Time to change battery in your PC card.
Not OK - Try the test using another PCMCIA card.
Press the HELP key to exit test.
Battery test
Select Battery test by pressing OK.
Confirm that result is OK.
Press the HELP key to exit test.
System test
Select System test by pressing OK.
Confirm that result is OK.
Result reads:
EEPROM not OK - The unit will most likely work ok, the
message is for service matters only.
DSP Not OK - Contact your local dealer.
Press the HELP key to exit test.
Power Off - On to start standard software.
Built-in test v.3.06
Service note
In case of the unlikely event that the unit needs to be send in for
service, please use the original box AND an outer box.
MIDI SYSEX CONTROLLERS
Left In
10
Right In
11
Ext. Insert In
12
Ext. Insert Out
13
Input (Analog or Digital) 14
Clock 15
Balance
16
Dither Select
17
Analog Out Gain
18
Fade Curve
19
Fade Time
20
Bypass
21
Low Cut Filter
22
Digital Out Format
23
Digital Out Copy
24
Block On Select
25
Insert 1 type
26
Fade Value
27
Fade Command
28
Insert 2 type
29
Normalizer Gain
30
Normalizer Clip
31
Low EQ Frequency 32
Low EQ Slope
33
Low EQ Gain
34
Band 1 EQ Frequency 35
Band 1 Bandwidth
36
Band 1 Gain
37
Band 2 EQ Frequency 38
Band 2 Bandwidth
39
Band 2 Gain
40
Band 3 EQ Frequency 41
Band 3 Bandwidth
42
Band 3 Gain
43
High EQ Freq.
44
High EQ Slope
45
High EQ Gain
46
EQ Overall Gain
47
L
M
H
Comp. Threshold
48 61 74
Compressor Ratio
49 62 75
Compressor Attack
50 63 76
Compressor Release
51 64 77
Compressor Level
52 65 78
Limiter Threshold
53 66 79
Limiter Ratio
54 67 80
Limiter Attack
55 68 81
Limiter Release
56 69 82
Exp. Threshold
57 70 83
Expander Ratio
58 71 84
Expander Attack
59 72 85
Expander Release
60 73 86
Low-Mid Crossover
87
Mid-High Crossover
88
Dynamics Clip
89
Dynamics Crest
90
Dynamics Level
91
Dynamics Ceiling
92
Dynamics Delay
93
Expander Range
94
Radiance Drive
95
Radiance Curve
96
Stereo Adjust MS
97
Stereo Adjust L/R
98
De-esser Threshold
99
De-esser Ratio
100
De-esser Attack
101
De-esser Release 102
De-esser Frequency 103
De-esser Curve
104
Finalizer96K Manual 01.99 28/01/99 16:23 Side 46