manualshive.com logo in svg

TC Communications TC3720, Руководство пользователя

Поделиться
Скачать
TC Communications TC3720 Скачать руководство пользователя страница 17

- 17 -

TC3720

User's Manual

Rev. 1.5

Figure 6.  TC3720 IP Settings Window

Software Configuration Continue
Configure IP Settings:

To configure the IP settings, click the "IP Settings" link on the left side of the page. On the IP settings window,
enter in the related IP address, Subnet Mask and Default Gateway as shown on figure 6, below.

Note

:

All switches and monitoring systems should be on the same network ( Contact your network
administrator for valid n etwork settings).

SHR Master:

 Select either Master or Slave.

SHR Port:

 This is the UDP port used by the TC3720. It can be any number as long as it is not used for public

port such as 80, 23 and etc. We recommend to use the factory default UDP port.

Note

:

All SHR ports of the switches on the ring should be kept the same.

SHR ID:

 Any integer. All units in a ring must have a unique SHR ID.

SHR Master ID:

 All units in a ring must be set to the same SHR Master ID.

For example

: The "SHR Master ID" and "SHR ID" for the Master should always be the same (by

default they should be zero "0"). The "SHR Master ID" value should also be set to zero
on all Slave units in the ring to match that of the Master. If this value is changed in the
Master unit, it should also be changed to the same value on all Slave units in the ring.

When done, click Apply to save the changes.

Note

:

 A window as in figure 14, page 25 will pop-up asking you to reset the new settings. After you click

    "reset" all the changes will be saved.  Then you will see a window asking you to refresh your browser
   or enter a new IP (only when you change the IP address) to continue the software configurations.

Содержание TC3720






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды