- 21 -
TC1910
User's Manual
Rev. 2.0 (A0.3)
To test the Phone line Extension function, Simply do the following: (Power off is not needed)
Unit A: (Assuming FXO unit is odered).
Set the "FXO" DIP Switch to on (down) position.
Connect a phone line between the TC1910 and the wall jack.
Unit B:
No Change
When handset at Unit B is picked up, the user should hear the dial tone and be able to dial to the outside phone
network just like regular telephone line extended.
If an Ethernet Switch is not available, you can replace the Switch with the supplied cross over cable as shown
below. Follow the same procedures as shown on page 20, Quick Start/Test for Unit A (Master) and Unit B
(Slave).
Hot Link Test
Содержание TC1910
Страница 2: ...2 TC1910 User s Manual Rev 2 0 A0 3...
Страница 22: ...22 TC1910 User s Manual Rev 2 0 A0 3...
