TC Communications TC1631R, Руководство пользователя

Страница: 2 / 22

- 2 -
TC1631R/S
User's Manual
Rev. 1.6
This unit has been setup at the factory as follows:
LINE CODE LINE LENGTH
AMI B8ZS HDB3 T1/E1 0 -133 134-266 267-399 400-533 534-655
( )
( )
Factory Default Configuration
SW1: Line Code switch setting (Only one setting should be marked):
A M I : SW1-3 in the
Down "On" position
B8ZS/HDB3 : SW1-3 in
the Up "Off" position
ON
3 2 1 4
AMI
B8ZS/HDB3
DISALM RMTLB
LOCLB
ON
3 2 1 4
AMI
B8ZS/HDB3
DISALM
RMTLB
LOCLB
Important Note : The factory default setting for the Line Length is "0-133 feet." If the need arises to
change the Line Length, contact the Technical Support Department at TC Communications, Inc before
opening the unit to avoid the Warranty being voided.