TBS technologies Octa-Tuner TBS-6909, Руководство пользователя

Страница: 5 / 30

www.tbs-technology.de
5
Linux Open Source driver model
Multiswitch mode: (Mode 0)
If you are using Quad-LNB, you can directly connect the 4 cables to the 4 ports of TBS-
6909/TBS-6909-X.
If you are using Quattro-LNB, you have 4 cables (V/L, V/H, H/L, H/H). Connect the right
one to you TBS-6909/TBS-6909-X like the above picture (input 0 - input 3 should be
connected to V/L, V/H, H/L, H/H respectively).
If you are using C or Ku band single, then two inputs are enough. You just need to
connect the cables to Input 0 and Input 2.
Input 0 Interface:
You can only receive DVB-S/-S2 TV channels from V/L TV signals with low frequency
noise. After connecting these TV signals via "Input 0 Interface", you can receive SD/HD
channels from all eight satellite transponders simultaneously.
Input 1 Interface:
You can only receive DVB-S/-S2 TV channels from high-frequency V/H TV signals.
After connecting these TV signals via "Input 1 Interface", you can receive SD/HD
stations from all eight satellite transponders simultaneously.
Input 2 Interface:
You can only receive DVB-S/-S2 TV channels from low-frequency H/L TV signals. After
connecting these TV signals via "Input 2 Interface", you can receive SD/HD channels
from all eight satellite transponders simultaneously.
Input 3 Interface:
You can only receive DVB-S/-S2 TV channels from high-frequency noise H/H TV
signals. After connecting these TV signals via "Input 3 Interface", you can receive
SD/HD channels from all eight satellite transponders simultaneously.
Hint:
If you want to receive TV broadcasts entirely from V/H satellite TV signals at the same
time, you need to connect your satellite TV signal cable to the corresponding input
interface.