5
7. SETTING UP
Press
the
SETUP
button to open the settings screen (If there is file that is being play, please
stop first).
There are two groups of sub-menu in the main menu (“Video Setup” and “Other Setup”).
In the settings screen, you can use the “
▲
、
▼
、
▲
、
▼
” buttons to select an item, and press the
ENTER
button to confirm the selection.
Press
the
SETUP
button to save and quit the settings screen.
7.1 Video Setup
TV Standard:
Select the output TV video format (NTSC / PAL).
NTSC Active Output:
Select the output mode (HDMI/ VGA/ HD YPbPr).
Aspect-ratio:
Select TV mode 4:3, 16:9, 16:10 or 5:4.
HDMI:
Select the HDMI output resolution among 480i/ 480p/ 720p / 1080i/ 1080p.
Select the “Auto EDID”, the MPL026P will scan the display device connected and set the
correct resolution automatically.
VGA 60Hz:
Select the VGA output resolution (640*480 / 800*600/ 1024*768/ 1280x1024
1360x768).
HD YPbPr 60Hz:
Select the YPbPr output resolution among 480p/ 720p/ 1080i.
6
7.2 Other Setup
Play OSD Display:
Enable or disable the OSD display.
Auto Play
-
Movies: Play movies automatically after the MPL026P is powered on.
-
Pictures: Play pictures automatically after the MPL026P is powered on.
-
All Files: Play all the media files automatically after the MPL026P is powered on.
-
Off: Turn off the Auto Play function.
SlideShow Interval:
Set the time each picture is shown to 10, 15, 30 seconds or 1, 10, 15, 30
minutes or 1 hour.
Transition effect:
Set transition effects
for your photo
slideshow.
