TBK-NVR2300 Network Video Recorder User Manual V2
59
Call a Pattern
Purpose
Follow the procedure to move the PTZ camera according to the predefined patterns.
Click
on the quick settings toolbar of the PTZ camera’s Live View.
The PTZ control panel displays on the right of the interface.
Click
Pattern
to configure pattern.
Select a pattern in the text field.
Click
Call
to start the pattern.
(Optional) Click
Stop
to stop the pattern.
Set Linear Scan Limits
Before You Start
Make sure the connected IP camera supports the PTZ function and is properly connected.
Purpose
Linear Scan trigger a scan in the horizontal direction in the predefined range.
This function is supported only by some certain models.
Click
on the quick settings toolbar of the PTZ camera’s Live View.
The PTZ control panel displays on the right of the interface.
Click the directional buttons to wheel the camera to the location of where you want to set the limit,
and click
Left Limit
or
Right Limit
to link the location to the corresponding limit.
The speed dome linear scans from the left limit to the right limit, and you must set the left limit
on the left side of the right limit. Also, the angle from the left limit to the right limit must be no
more greater than 180º.
P
attern Configuration