13
INSERTING THE SD CARD
Install the
TF Micro SD сard when
the camera is off.
The camera supports the 10 class
TF card with a maximum capacity
of 128GB
Push the “ON” button on the Solar
Panel and directly connect the
Camera power cable to the Solar
panel power cable, after which
the front Camera LED will begin
flashing Blue.
At the same time you will hear
the following voice prompt/voice
notification, “The camera is now
ready to begin pairing.”
TURNING ON THE CAMERA
Turn the ON/OFF button on
the Solar Panel, or just simply
disconnect the Camera power
cable from the Solar power cable.
HOW TO TURN OFF THE CAMERA
Press the RST button to reset the
camera.
After 3-5 seconds, the LED will
begin flashing, and you will hear
the following voice prompt/voice
notification, “system reset”.
HOW TO RESET THE CAMERA