1309630B
2013-12-10
4
1. Improper use or maintenance of this equipment can cause serious injury. To reduce this
possiblity, know how this equipment works, how to maintain it and, when using it, give it
complete and undivided attention.
saFEty pREcautiOns
2. Learn the controls, know how to control this equipment quickly in an emergency.
3. Operate this equipment safely. Keep all individuals not involved in the operation of this
equipment a safe distance away.
4. Allow only trained personnel to operate this equipment.
5. Always wear relatively tight fitting and belted clothing when operating or maintaining
this equipment. Loose fitting jackets, shirts or other baggy clothing can become caught in
moving parts or on controls.
6. Shut off all controls for this equipment before starting the engine so equipment will not
start when the engine is started.
7. Shut off all controls for this equipment and the truck engine before performing any clean-
ing, maintenance or when storing the equipment.
8. Always check the area around the truck to make sure it is clear before operating this equip-
ment.
9. When leaving the truck unattended, take steps to secure the truck from untrained operators
or unintended movement. Shut off all hydraulic controls, the engine, set the parking brake
and remove the key.
10. Before storing this equipment, be sure to release any trapped hydraulic pressure.
11. Replace any damaged or unreadable safety decals. Place them as shown in Fig. 1 on page
5.
spEciFicatiOns
1. Operating Pressure
1500 PSI Maximum
2. Auger Flow Rate
0-14 GPM
3. Spinner Flow Rate
0-7 GPM
5. Auger
6”
6” Diameter, 4” Pitch, 3/8” AR Flighting
9”
9” Diameter, 6” Pitch, 3/8” AR Flighting
6. Materials
Trough
- 201 Stainless Steel
Spinner Mount
- 201 Stainless Steel
Auger
- Steel
4. Hydraulics
Fluid
- ISO 32 Hydraulic Fluid or Dexron III
Filtration
- 10 micron Return Line
