TBA e-Doctor, Руководство пользователя

Страница: 31 / 44

30
While saving, if the message [Save Parameter Fault] (Figure 35) is
displayed, check the connection between the e-Doctor and the meter
then try again.
Figure 35 Saving fault
After changing all the desired parameters, press [Back] to go back to
the configuration interface.
Configuration of the controller
For controller parameter configuration please refer to
“Configuration of the meter” in the previous section.
Configuration of the BMS
For BMS parameter configuration please refer to “Configuration
of the meter” in the previous section.

If even a single parameter is wrong, the whole e-bike
may not work.