- 11 -
A touch on the icon “123“ opens the above menu:
The activated button turns green
123
.
Displayed are:
- the program number “1“
- the program name “DIRP“
- the position of the frequency w ithin the program – betw een 1 and 50 – here ”1“. The left and right arrow s
can be touched to move to other frequency values of the program.
- “INS“ can be touched to shift the present frequencies to the right to insert a new frequency to the program.
- “DEL“ can be touched to eliminate the present frequency of 87000.00 Hz f rom the progra m.
- “CONT” can be touched to define a protocol or program w hich shall be used to continue an application. The
use of the CONT feature is explained in a special chapter.
- the total runtime of the program of 30 minutes “TT = 30:00“.
- the runtime of the present frequency in minutes : seconds on the below the “clock” icon w ith “03:00” (3
minutes and 0 seconds).
- the signal form selected “AUTO“.
- the icons “WOBBLE” and “ ENV ELOP” re main inactive (their background is w hite).
How to select a program from the menu “123“
A touch on the program bar
opens the submenu to select a progra m from memory, to edit a program name, or to add or de lete a prog ram.
10 names of all progra ms stored in the memory block of 100
positions are displayed in the blue f ield. The present progra m
number and name are show n in blue. All other (unselected)
programs are show n in black. A cursor line is visible behind
the name.
The vertical scroll bar can be used to access program
positions 11 to 100.
A touch on the red cross in the upper right corner closes
this menu.
Any touch on a position 1: to 10: selects the associated program.
A touch on
NAME
opens the keyboard and it is possible to modify the name of the progra m w ith up to 20
characters.
X
= close keyboard
= move left and erase
CLEA R
= erase entire line
ENTER
= close keypad and store new entry.
^
= sw itch to capital letters.
