® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
7
DOOR PREPARATION
4
PREPARE DOOR JAMB AND INSTALL STRIKE PLATE
a. To identify the center of the strike: insert the latch, close the door;
using the latch faceplate as a guide, mark horizontal centerline and
outline of the strike. Ensure the center of the faceplate and the
center of the strike are aligned.
b. Chisel 5/64” (2 mm) deep along the strike outline to allow the strike
to be aligned with the door frame.
c. Insert the strike and tighten it with wood screws.
Door jamb hole dimension
a. 1-3/16 (30 mm)
b. 1-3/8” (35 mm)
c. 1” (25 mm)
Strike dimension
d. 9/32” (7 mm)
e. 2-15/16” (75 mm)
f. 1-5/16” (33 mm)
a.
b.
c.
A
B
C
D
E
F
