WN 059506 45532 – 2019-03
EN
STV 2xx
Mounting instructions
1 About this manual
1.1 Target group
The STV 2xx door lock must only be mounted by
trained electricians with specific knowledge of
electromechanical locks, fire safety codes and
regulations.
1.2 Intended use
The STV 2xx is used to keep doors securely closed, and
to open them without delay in case of emergency. The
STV 2xx is used in the SafeRoute® system.
1.3 Other applicable documents
• System instructions for the used SafeRoute® license
• Operating instructions for the SafeRoute® system
• Inspection logbook
1.4 Symbols used
ATTENTION
This signal word indicates a situation of
potential risk, which could lead to damage
to property or the environment if not
averted.
TIPS AND RECOMMENDATIONS
This signal word indicates useful information
for efficient and trouble-free operation.
1.5 Further labeling
1.
2.
Sequence of action steps
6
Reference to a chapter
Reference to another document
Door opening direction DIN left =
opening outwards to the right
Door opening direction DIN right =
opening outwards to the left
Components may be damaged by
electrostatic discharges
1.6 Tool symbols
3
Allen wrench,
e.g. wrench opening 3
2 Safety
ATTENTION
Property damage by electrostatic discharge.
The control board may be damaged by an
electrostatic discharge!
• The user must ground her/his own body
before touching a component!
Contents
