Taylor Xpress Flex, Быстрый старт

Страница: 6 / 8

3
The Test Strip Clip and Test Strip Loader are color-coded and labeled to match with corresponding strips to ensure proper
readings.
The strip loader makes adding strips simple, and it ensures the strips are aligned for accuracy.
Test:
1) Place the desired strip(s) onto the appropriate slots on the strip loader and use the strip clip to pick them up.
2) Select “Start Test” in the sureTREAT software. sureTREAT will provide timers on the screen, as well
as audio cues if you have speakers.
3) Dip the test strips into the vial for 2 seconds noting the correct orientation of test strips to the vial, remove,
and place the strip clip onto the shuttle. Press the shuttle into the device.
4) After one minute of testing, your results are ready.
Pro Tip: If you have multiple samples to be tested, this is great time to start the process for your next test.
Pro Tips for handling test strips:
∙
Be sure you have dry hands before opening the test strip bottle.
∙
Always handle strips from the bottom to avoid contact with the test pads.
∙
Keep lid securely closed after removing a strip to prevent moisture from entering the bottle.
You will notice that the Flex 2 strip is packaged in an individually foil-wrapped sleeve. This packaging helps protect the
strip from sunlight which can degrade the salt test pad.
5) Empty and rinse water sample dipping vial after each test.
Pro Tip: For best results, pour used sample water out of the vial by holding the vial horizontally versus vertically. The iron
and phosphate test prep reagents can cause interference if they enter and contaminate the center chamber.