Taylor QS11 Скачать руководство пользователя страница 21

Страница: 21 / 43

Models QS11 & QS23

Important: To the Operator

Temperature Controls

The Model QS11 is equipped with one temperature

control and the Model QS23 is equipped with two

individual temperature controls. They control both the

upper and the lower temperatures. The lower cook

surface temperatures can be set manually from 150

- 400

F (65

- 204

C). The upper cook surface

temperatures can be set manually from 150

- 425

(65

- 219

C). The left and right sides (zones) of the

Model QS23 grill operate independently.

Control Board

This unit is equipped with a microprocessor control,

programmable by the operator.

Keypad and Display

Located on the front panel, beneath the cooking zone,

is an alpha-numeric LED display and a group of keys

used for operating, programming, and servicing the

grill and its microprocessor control.

The keys are illustrated with icons, descriptive of their

functions, and referred to in these instructions as

follows:

= MENU

= TIME

= TEMP

= UP ARROW

= DOWN ARROW

The display is a visual message center for the user,

operator (maintenance personnel or manager), and

the service technician.

Operating Screen and Controls

The VERSION SCREEN is viewed when a grill is

powered for normal operation. It indicates the version

of software the microprocessor is using.

VER 1.01B

Note:

If the grill is not equipped with the upper cook

surface option, the words “NO PLTN” will appear on

the display for two seconds before the version screen

appears.

Pressing any key will advance the display to the

COOKING SCREEN. These screens are described in

the “Operating Procedures” section of these

instructions.

The MEMORY INITIALIZATION SCREEN appears if

the grill has never been used or in the rare event that

set-up parameter memory has been lost.

MEM INIT

When this screen appears on the display, the

parameters previously programmed by the operator

will revert back to the factory default values. Pressing

the MENU key will advance the display to the

VERSION screen.

Factory defaults

Upper 400

TM1

Lower 325

TM2

If set-up parameter memory is lost, programmed

names will revert back to the “ITEM” messages.

After the VERSION SCREEN is displayed and a key

is pressed, the grill will enter the ITM1 COOK mode of

operation.

Содержание QS11












































Результаты поиска

Содержание QS11

Отзывы:

Бренды по названию

Популярные бренды

Taylor QS11, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание QS11

Отзывы:

Бренды по названию

Популярные бренды