34
Model C043
Operating Procedures
Step 2
Thoroughly brush clean all disassembled parts in the
cleaning solution, making sure all lubricant and mix
film is removed.
Figure 82
Step 3
Use the double-ended brush to clean the inside of
the feed tubes.
Figure 83
Step 4
Return to the freezer with a small amount of
cleaning solution. Using the draw valve brush
(1” x 2” x 17”), brush clean the mix inlet hole in each
mix hopper.
Figure 84
Step 5
Using the brush with the long black tip, brush clean
the rear shell bearing at the back of each freezing
cylinder.
Figure 85
