Taylor CD-MULTIGUN, Руководство по эксплуатации

Страница: 17 / 29

V - 21A
17
WELD SETTINGS
The following pages (18 to 20) detail the suggested settings for the Multigun
controller
, both Contact & Lift Gap
The setting charts were established with the performance of repetitive
weld tests using the standard equipment's specified above, studs manufac-
tured to the BS EN ISO 13918 standard, in the following materials :
Mild Steel, Grade St37 - 3
Stainless Steel, Grade 1.4303
Aluminium Alloy, Grade AlMg3
and sheet materials of the following types :
1.6 mm Thick, Mild Steel, Grade CR4
1.6 mm Thick, Stainless Steel, Type S304
1 mm Thick, ZINTEC Coated Mild Steel, Grade CR4
1.6 mm Thick, Aluminium Alloy, Grade HE3, Half Hard
The settings are given only as a general guide and it is recommended that
sample welds be carried out on your own material, as quality of materials and
site conditions may vary from user to user.