Taylor C152 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 88

Taylor C152 Скачать руководство пользователя страница 7

INTRODUCTION/SAFETY

1-3

Model C152 & C161

Introduction/Safety

1

WARNING!

This machine has many sharp

edges that can cause severe injuries.

Examples:

•Scraper blades
•Condenser fins
•Cup/cone dispenser (if applicable)

CAUTION!

This machine must be installed on

a level surface to avoid the hazard of tipping. Extreme
care should be taken in moving this machine for any
reason. Two or more persons are required to safely move
this machine. Failure to comply may result in personal
injury or machine damage.

WARNING!

This machine must

NOT

be

installed in an area where a water jet or hose can be
used.

NEVER

use a water jet or hose to rinse or clean

the machine. Failure to follow this instruction may result
in electrocution.

NOTICE!

Cleaning and sanitizing schedules

are governed by your federal, state, or local regulatory
agencies and must be followed accordingly. Please see
the cleaning section of this manual for the proper
procedure to clean this machine.

Authorized service personnel must ensure that the
proper personal protective equipment (PPE) is available
and worn when required during installation and service.

!

«
...
5
6
7
8
9
...
»

Содержание C152

























































































Отзывы:

Нет отзывов