Taylor C125, Инструкция по эксплуатации и техническому обслуживанию

Страница: 12 / 36

11 - ENGLISH
4.4. CONSERVATION OF ICE CREAM (for
model G10 only)
The function of “ice cream conservation”
maintains the product for a long period of time at
correct temperature and consistency directly in
the freezing tank.
Thanks to this function you may decide to
distribute the ice cream according to needed
quantity and time periods .
Further more, you may add in whenever moment
fresh product to compensate the distributed
quantity.
In order to select the program “ice cream
conservation” proceed as following:
-
pour the mix in the freezing tank and start the
freezing cycle as per cap. 4.2.
- in whenever moment press button
CONSERVATION (4) and check that green led is
on. Once finished the preset freezing cycle, the
machine will automatically changeover to
conservation
- During the conservation period, the beater motor
and compressor will cyclic be on in automatic
way.
-
During the freezing cycle, if you lift the cover, for security reasons, the production cycle
will be interrupted and the led (5) will be on. To restart the freezing cycle, close the cover
and check that the led is off.
-
During the conservation cycle, if you lift the cover, for security reasons, the beater and
compressor will stop. If the led (5) will be off, this means that the product is at correct
distribution temperature; if the led is on, this means that the product may not be at correct
temperature for the distribution of the product and therefore you have to close the cover
to bring the machine in ideal conditions.
-
During the conservation cycle it is possible to increase low product quantity with fresh
mix without acting on the freezer timer. On the contrary, if the poured quantity is too
much, it may be necessary to act on the timer in order to start e new short freezing cycle.