Taylor 810 Series Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 56

Taylor 810 Series Скачать руководство пользователя страница 31

OPERATING PROCEDURES

6-9

Model 810, 812, 820, 822, 828 Series

Operating Procedures

6

6.

Press the STORE MENU TO USB key.

Figure 6-25

7.

Using the keyboard displayed on the control, enter a

file name to save the menu item. The name can have

up to eight characters and must have no spaces.

Pressing the OK key will save the menu item to the

USB flash drive. Press the EXIT key three times to

return to the menu item screen.

8.

Remove the USB flash drive from the USB port and

reinstall the USB cable cap on the USB connector.

Loading Menu Items from USB

Once the menu file is loaded on the USB flash drive, the

next control board can be programmed from the USB

flash drive.

1. Repeat steps 1 through step 5 from LOADING

STORE to USB.

2. Press the LOAD MENU FROM USB key.

3. The control can display up to 40 different menu

options loaded on the USB flash drive. Select the key

for the correct menu to load. The control will display

DONE at the bottom of the screen when the menu is

loaded. Press the EXIT key twice to return to the

menu item screen.

4. Remove the USB flash drive from the USB port and

reinstall the USB cable cap on the USB connector.

5. To load menu items from the USB flash drive to

another control board, repeat these software-loading

procedures.

«
...
29
30
31
32
33
...
»

Содержание 810 Series

























































Отзывы:

Нет отзывов