The product is intended for home/consumer use only; it is not intended for professional
use in hospitals or medical facilities.
Note:
If you are having any problems operating this Body Fat Analyzer, please
call 800-466-3342, between the hours of 8:30 a.m. to 5:00 p.m. EST
Specifications
• Uses BIA (Bioelectrical Impedance Analysis) to determine body fat percentage.
• High precision STRAIN GAUGE technology to determine weight.
• Weight Capacity: 330 lb or 150 kg
• Weight Graduation: 0.2 lb or 100 g
• Body Fat Graduation: 0.1%
• Height Range: 3’3.4” - 6’6.7” (100.0 - 199.9 cm)
• Age Range: 10 - 80 years
• Measures both weight and body fat simultaneously in about 10 seconds
• Weight-only feature with automatic step on
• Data can be stored for up to 10 individuals
• User selectable units of measure (lb/in) or (kg/cm)
• Low-battery indicator
• Operates on one 9-Volt alkaline battery (not included)
Trouble Shooting
1.
You must have bare feet when using body fat measurement.
To get the most
accurate and consistent reading, wipe your feet with a damp cloth, leaving them slightly
moist before stepping on scale.
2.
Display Err0
Initialization error. The user is advised to take the measurement again
for an accurate result.
3.
Display Err1
Wrong usage or body not stable. Be sure feet are centered on the
metal electrodes. Repeat measurement again.
4.
Display Err2
Overload Warning. Remove the weight immediately; otherwise,
permanent damage to the scale will occur.
5.
Display Err3
Body impedance is beyond the technical limit. Clean bottom of feet
with a damp cloth, leave slightly moist, and repeat measurement again.
6.
Display Err4
Body fat percentage is beyond the range (5% to 50%). Clean bottom of
feet with a damp cloth, leave slightly moist, and repeat measurement again.
7.
Display
LLoo
Replace the battery when “
Lo
” is displayed.
8. The condition of the skin on the bottom of your feet can affect the reading. The natural
effects of aging or activity can make this skin hard. Take the reading with clean, slightly
moist feet for best accuracy.
Care and Maintenance
1. Do not disassemble the scale other than replacing the battery; it contains no user
serviceable parts. Damage to the scale may occur as a result of improper handling.
2. Remove battery when the scale is not used for a prolonged period of time.
3. Clean the scale after use with a lightly dampened cloth. Do not use solvents or immerse
the unit in water.
4. Avoid excessive impact or vibration to the scale, such as dropping it onto the floor.
LCD Display
LOW
AGE
WEIGHT
%BODY F
AT
HEIGHT
WEIGHT
MEMOR
Y
NORMAL
HIGH
CM
KG
L B
M R
Male icon
Female icon
Body Fat Status Bar
Ready mode
Memory mode
6
7
13477IB 10/13/04 12:13 PM Page 7
