Taylor 1200E, Руководство по эксплуатации

Страница: 17 / 43

V - 21A
VISUAL WELD INSPECTION
17
EXAMPLE 4
PROBLEM : Insufficient stud protrusion set on the pistol.
REMEDY : Adjust stud protrusion to correct setting (refer to your pistol
setup guide).
EXAMPLE 5
PROBLEM : Poor alignment i.e. stud is not perpendicular to the workpiece.
REMEDY : Hold the pistol perpendicular to the work - piece (see page 14).
NOTE : If the misalignment is only slight and in all other aspects the
weld is good, then the weld may be salvaged by tapping
straight with a soft mallet.
A broader set of examples may be found in the standard BS EN ISO 14555:2014 Annex 5,
Tables A5, A6 & A7

