Taylor-Dunn Tiger TC-030-60, Руководство по эксплуатации, обслуживанию и замене запасных частей

Страница: 23 / 186

SAFETY RULES AND OPERATING INSTRUCTIONS
Safety Rules and Operating Instructions: MT-030-60-C
Page 13
T
A Y
L OR - DU N
N
Th
e
B
e
st
W
ay
To
Go About
Yo
ur
Bu
si
n
e
ss
R
MAINTENANCE GUIDELINES FOR
SEVERE DUTY APPLICATIONS
1. This maintenance checklist is based on the average application. If the vehicle is operated under
“severe conditions”, service procedures should be conducted more frequently than specified. The
frequency of service under severe conditions is determined by the use of the vehicle. The owner/
operator must evaluate the operating environment to determine the increase in maintenance frequency.
In addition, the entire vehicle should be inspected monthly for signs of damage. The damage must be
repaired immediately.
The following list is meant as a guide and is not all-inclusive of a “severe duty” application.
• Extreme temperature.
• Bumpy, dusty, or ill maintained roads.
• Excessively wet areas.
• Corrosive or contaminated areas.
• Frequent loading of vehicle at/near capacity.
• Use on multiple shifts.
2. Any deficiencies found during an inspection should corrected before the vehicle is returned to service.
Daily Visual inspection:
• Tire condition and pressure.
• External frame damage (body).
• Proper operation of all external lights, internal lights, warning lights, warning alarms and/or horns.
• Proper operation of all instrument panel gauges and/or warning lights.
• Proper operation of trailer hitches.
• Inspect for leaking fluids or grease.
• Smooth and proper operation of all controls such as but not limited to:
• Throttle pedal, Brake pedal, Steering, Parking brake, etc.
• Proper operation of all personnel restraint
systems.
• Proper operation of all starter interlock switches.
• Proper operating of all door latches
• Engine oil level
New front wheel bearing adjustment must be
inspected after the first 24 hours of operation.
This includes new vehicle installations. Failure
to inspect the bearings after the break in period
may result in premature failure of the bearings.