Taylor-Dunn C0-T50-80 Скачать руководство пользователя страница 8

Страница: 8 / 135

Page-8

MC-T50E-02

Introduction

C0-T50-80

ABOUT THIS MANUAL

The purchase of this vehicle shows a belief in

high quality products manufactured in the USA.

Taylor-Dunn

, a leading manufacturer of electric burden

and personnel carriers since 1949, wants to be sure

this vehicle provides years of reliable service. Please

continue to read this manual and enjoy this high quality

Taylor-Dunn

vehicle.

This manual is to serve as a guide for the service,

repair, and operation of Taylor-Dunn

vehicles and is

not intended as a training guide. Taylor-Dunn

has made

every effort to include as much information as possible

about the operation and maintenance of this vehicle.
Taylor-Dunn is not to be held liable for errors in this

manual or any consequential damage that results from

the use of this manual.
Before servicing, operating, training or performing

maintenance on this or any other Taylor-Dunn

vehicle,

read the appropriate Taylor-Dunn

manual.

Each Taylor-Dunn

manual references the applicable

models and serial numbers on the front cover.
Please, be aware of all cautions, warnings, instructions,

and notes contained in this manual.

WHO SHOULD READ THIS MANUAL

This manual is intended for use by anyone who is going

to operate, own, perform maintenance on, service, or

order parts for this Taylor-Dunn

vehicle. Each person

shall be familiar with the parts of this manual that apply

to their use of this vehicle.

HOW TO USE THIS MANUAL

This manual is organized into these main sections:

Introduction

This section describes how to use this service manual

and how to identify your vehicle.

Maintenance, Service, and Repair

This section gives specific information on the servicing

of the vehicle and a schedule for maintenance checks.
This manual is for mechanical repairs only and does

not include electrical diagnosis procedures. Electrical

diagnosis procedures are included in a separate manual.

Replacement Parts

This section provides an illustrated view of various

assemblies. The illustrations are accompanied by tables

identifying the parts.

Содержание C0-T50-80








































































































































Результаты поиска

Содержание C0-T50-80

Отзывы:

Бренды по названию

Популярные бренды

Taylor-Dunn C0-T50-80, Руководство по обслуживанию и запасным частям

Результаты поиска

Содержание C0-T50-80

Отзывы:

Бренды по названию

Популярные бренды